With all the different in bed accessories available, we saw a need to supply you with a custom bed bolt kit Both options will thread directly into the factory placed...
Made to bolt on directly to your pickup truck bed bolts or cargo trailers Contructed from high strength steel with durable black zinc plated to prevent rust Ideal to tie...
-Description- -Alleviate the common issue of bed bounce and flex with our NEW KHC Bed Support Strengthening system. -Bolts in using factory bed bolt and the factory bed extender provisions....
Crack open a cold one on your new KHC Off-Road "Tailgater" Bolt in Bed Supports!! This new kit sports the greatest nations Flag and a stainless steel bottle opener...
THIS KIT WAS ASSEMBLED WITH SOME OF THE STRONGEST HARDWARE ON THE MARKET. FITS GEN 1 AND GEN 2 FORD RAPTOR OEM AND SOME AFTERMARKET LOWER CONTROL ARMS THE REPLACEMENT...
This conversion kit was created from necessity. With the abundant availability of Gen 2 take off coilovers it was only natural for this kit to be developed. Hand Crafted in...
Not long after we released the conversion buckets we realized there was a need to properly run GEN 2 Raptor rear shocks on the Gen 12 F150s, This kit will require...
Ford Raptor Leaf Spring U-Bolt kit Compatibility may vary, but should work with OEM, Deaver and Icon leaf springs, may work with other springs, please measure to confirm before...
Replace those old worn out LCA bolt with our high strength Replacement kit The standard OEM replacement kit includes: 4 x M18-2.5 x 140mm class 10.9 bolts 4...
These Fabricated heavy duty for downs are constructed from 3/16 steel with optional powder coating. From spare tires, to atvs, coolers and more, *Once secured, the tie down will...
The hardware installed by Ford are torque to yield, meaning they are no supposed to be reused This kit includes hardware which are direct replacement on Ford F150s and Gen...
KHC OFF-ROAD BED MOUNTED FLAG POLE / ANTENNA MOUNT - bed supports NOT required Keeps Your Flag Safe and Secure. With this Ford F150 Single Flag Holder Kit, you can finally...
We finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The...
OUR NEWLY RELEASED KHC OFF-ROAD FABRICATED SHACKLES ARE OVER DESIGNED TO BE TOUGH AND WILL TAKE WHATEVER YOU CAN PUT THEM THROUGH. THE SHACKLE BODY IS BUILT FROM 3/16...
This custom in house designed bump-stop brace kit is made from 1/4 inch steel and is designed to brace the rear frame of your F150 Raptor in order to prevent...
Fitment: 2011-2014 & 2017-current Raptor, 2015-current F150 with 9.75 rear differential (will not fit super 8.8) (sorry 2010 guys, your axle housing is different) Help all your unleashed power...
If Your replacing your shackles or springs, the OEM Bolts are one time use, Hardware is either Grade 8 or Metric 10.9 equivalent (zinc finish may vary between standard and...
We assembled these kits with the best of the best when it comes to lug nuts. All Kits include 24 Lug Nuts and one spline drive key (extras optional) The...
Don't get stuck on the side of the road or trail because of a melted fuse terminal, easy and quick to install with common hand tools Product Description This fuse...
THESE WELD ON SUPPORTS ARE A MUST HAVE FOR PROTECTING THE REAR MOST DRIVETRAIN CROSS MEMBER UNDER THE TRANSFER CASE. THEY CAN ALSO BE USED TO REPAIR AN ALREADY DAMAGED...
TOTALLY ENCLOSE & PROTECT YOUR ROD ENDS FROM DIRT & MOISTURE THESE “BOOTS” COMPLETELY ENCLOSE THE HEAD PORTION OF THE ROD END AND ARE HELD IN PLACE BY THE...
AUTHENTIC DEAVER SPRING INSTALLATION KITS KIT INCLUDES: 4 X LEAF SPRING U-BOLTS WITH WASHERS AND NUTS 8 X LEAF SPRING BUSHINGS WITH SLEEVES (GENERATION SPECIFIC) 2 X SPRING TO FRAME...
We have assembled this kit with the best, most durable parts on the market to cure the common problem of damaged, dry rotted tie rod boots. This kit...
PROTECT YOUR INVESTMENT WITH OUR FULL COVERAGE SKID PLATE. USES ALL FACTORY MOUNTING LOCATIONS AND INCLUDES ALL HARDWARE. BUILD FROM 1/4" MARINE GRADE ALUMINUM *NOT DESIGNED TO WORK...
This Versatile Flat Tire Storage Mount Is A Great Option For The Weekend Warrior And Aggressive Off-Roader. - Built And Gusseted From 3/16 Steel, Holds Up To A 40" Tire!!...
Take your Raptor or FRaptor to the next level with this Stock Replacement Fabricated LCA This kit is designed to directly replace your weak, worn out OEM arms. Its designed...
KHC's S1 Frame Cut Front Bumper for Gen 1 Raptors, Bumper is constructed from 3/16 and 1/4 steel. The skid plate is made from 1/4 Aluminum. DEFAULT COATING IS...
You get the only the best with SPD's 3" aluminized resonator delete pipes. These resonator delete pipes are 3" all the way through with no reductions. Bolt this resonator delete...
THIS PRO EAGLE JACK MOUNT IS BUILT FOR THE 2 TON (NONE LARGE WHEELED) JACKS Features - Item will be powder coated dark grey unless otherwise specified, contact...
Made from 1/4 aluminum.
Mounts to factory rear cargo tie downs, pass or driver side.
Uses quickfist clamps or clamps of your choosing. (not included)
Fits 09-14 F150/Raptor.
After a nice long wait, the KHC Rear Dove Tail Bumper is ready!!! Increase your departure angles and look bad a$$ doing so!! Our Bumpers are made to...
This mount was designed with HPA Systems to conveniently and safely mount an HPA AirLift 580 The Hpa Jack is securly held in place with forward tabs and a...