With all the different in bed accessories available, we saw a need to supply you with a custom bed bolt kit Both options will thread directly into the factory placed...
Made to bolt on directly to your pickup truck bed bolts or cargo trailers Contructed from high strength steel with durable black zinc plated to prevent rust Ideal to tie...
-Description- -Alleviate the common issue of bed bounce and flex with our NEW KHC Bed Support Strengthening system. -Bolts in using factory bed bolt and the factory bed extender provisions....
Crack open a cold one on your new KHC Off-Road "Tailgater" Bolt in Bed Supports!! This new kit sports the greatest nations Flag and a stainless steel bottle opener...
KHC Off-Road Standard and Extended length skid plate mounting brackets -Replaces the factory bracket on a Gen 2 Ford Raptor or Allows for 13th Generation F-150 owners to bolt...
Due to high demand and limited supply, Items will be built to order with a lead time of 4-8 weeks from purchase. This tail pipe kit was designed to maximize...
THIS KIT WAS ASSEMBLED WITH SOME OF THE STRONGEST HARDWARE ON THE MARKET. FITS GEN 1 AND GEN 2 FORD RAPTOR OEM AND SOME AFTERMARKET LOWER CONTROL ARMS THE REPLACEMENT...
I finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The...
Due to high demand and limited supply, Items will be built to order with a lead time of 4-8 weeks from purchase. This Versatile Flat Tire Storage Mount Is A...
Ford Raptor Leaf Spring U-Bolt kit Compatibility may vary, but should work with OEM, Deaver and Icon leaf springs, may work with other springs, please measure to confirm before...
Replace those old worn out LCA bolt with our high strength Replacement kit The standard OEM replacement kit includes: 4 x M18-2.5 x 140mm class 10.9 bolts 4...
These Fabricated heavy duty for downs are constructed from 3/16 steel with optional powder coating. From spare tires, to atvs, coolers and more, *Once secured, the tie down will...
OUR NEWLY RELEASED KHC OFF-ROAD FABRICATED SHACKLES ARE OVER DESIGNED TO BE TOUGH AND WILL TAKE WHATEVER YOU CAN PUT THEM THROUGH. THE SHACKLE BODY IS BUILT FROM 3/16...
The hardware installed by Ford are torque to yield, meaning they are no supposed to be reused This kit includes hardware which are direct replacement on Ford F150s and Gen...
KHC OFF-ROAD BED MOUNTED FLAG POLE / ANTENNA MOUNT - bed supports NOT required Keeps Your Flag Safe and Secure. With this Ford F150 Single Flag Holder Kit, you can finally...
Due to high demand and limited supply, Items will be built to order with a lead time of 4-8 weeks from purchase. Fitment: 2011-2014 & 2017-current Raptor, 2015-current F150 with 9.75...
Our Rear dove tail cut bumper fits Ford 2015-current F150s and 2017 Ford Raptors 2017-current and was designed to increase off road departure angle while maintaining a clean, finished...
If Your replacing your shackles or springs, the OEM Bolts are one time use, Hardware is either Grade 8 or Metric 10.9 equivalent (zinc finish may vary between standard and...
We assembled these kits with the best of the best when it comes to lug nuts. All Kits include 24 Lug Nuts and one spline drive key (extras optional) The...
THESE PLATES ARE DESIGNED TO WORK WITH OUR KHC GEN2 RAPTOR REAR DOVE TAIL BUMPER. THEY ADD A FINISHED LOOK TO THE DOVE TAIL CUT BED SIDES, WHILE HELPING...
This custom in house designed bump-stop brace kit is made from 1/4 inch steel and is designed to brace the rear frame of your F150 Raptor in order to prevent...
Prevent your knuckles from bending! Full bolt on minor grinding required to the knuckle cast seam and 2 holes drilled ! These will ship black powder coated for other color...
KHC's Frame Cut Front Bumper for Gen 2 Raptors and Raptor Swapped F150s Bumper is constructed from 3/16" and 1/4 steel". The skid plate is made from 1/4" Aluminum. Standard...
TOTALLY ENCLOSE & PROTECT YOUR ROD ENDS FROM DIRT & MOISTURE THESE “BOOTS” COMPLETELY ENCLOSE THE HEAD PORTION OF THE ROD END AND ARE HELD IN PLACE BY THE...
AUTHENTIC DEAVER SPRING INSTALLATION KITS KIT INCLUDES: 4 X LEAF SPRING U-BOLTS WITH WASHERS AND NUTS 8 X LEAF SPRING BUSHINGS WITH SLEEVES (GENERATION SPECIFIC) 2 X SPRING TO FRAME...
We have assembled this kit with the best, most durable parts on the market to cure the common problem of damaged, dry rotted tie rod boots. This kit...
When you have our Stage 2 or 3.0H slot delete kit, the OEM skid plate can not be reinstalled. This replacement skid will take its place. made from 1/4" marine...
Take your Raptor or FRaptor to the next level with this Stock Replacement Fabricated LCA This kit is designed to directly replace your weak, worn out OEM arms. Its designed...
Due to high demand and limited supply, Items will be built to order with a lead time of 4-8 weeks from purchase. Fitment: 2017-current Raptor & 15-current F150 Engine skid...
This Heavy Duty lower intercooler mount was born from necessity. We have repaired plenty of lower brackets to know this was needed. Kit is bolt on and all hardware is...
Raptor Gen 2 Modular Tire Carrier. This product has many options, so please call the shop to place the order of interested All of our products are made...
Fitment: 17-Current Raptor, 15-current F150 THIS MOUNT EASILY BOLTS INTO A GEN 2 RAPTOR BED USING THE FACTORY BED BOLTS. ITS DESIGNED TO HOLD A PRO EAGLE JACK (NON BIG WHEEL)...
This mount was designed with HPA Systems to conveniently and safely mount an HPA AirLift 580 The Hpa Jack is securly held in place with forward tabs and a...
Made from 1/8 thick aluminum, this Fuel Tank Skid plate is a great upgrade above the OEM Polycarbonate one. The skid is a direct replacement and reuses all factory...
