F-Series and Other - Gen 2 Ford Raptor Suspension (17)

THIS KIT WAS ASSEMBLED WITH SOME OF THE STRONGEST HARDWARE ON THE MARKET. FITS GEN 1 AND GEN 2 FORD RAPTOR OEM AND SOME AFTERMARKET LOWER CONTROL ARMS THE REPLACEMENT...

  Ford Raptor Leaf Spring U-Bolt kit Compatibility may vary, but should work with OEM, Deaver and Icon leaf springs, may work with other springs, please measure to confirm before...

Replace those old worn out LCA bolt with our high strength Replacement kit     The standard OEM replacement kit includes: 4 x M18-2.5 x 140mm class 10.9 bolts 4...

I finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The...

  OUR NEWLY RELEASED KHC OFF-ROAD FABRICATED SHACKLES ARE OVER DESIGNED TO BE TOUGH AND WILL TAKE WHATEVER YOU CAN PUT THEM THROUGH. THE SHACKLE BODY IS BUILT FROM 3/16...

    Reduce the risk of cracked leaf springs on your F150 and Gen 1 and 2 Raptor.s   This kit includes two powder coated plates and install very easily....

Fitment: 2011-2014 & 2017-current Raptor, 2015-current F150 with 9.75 rear differential (will not fit super 8.8) (sorry 2010 guys, your axle housing is different)     Help all your unleashed power...

This custom in house designed bump-stop brace kit is made from 1/4 inch steel and is designed to brace the rear frame of your F150 Raptor in order to prevent...

If Your replacing your shackles or springs, the OEM Bolts are one time use, Hardware is either Grade 8 or Metric 10.9 equivalent (zinc finish may vary between standard and...

AUTHENTIC DEAVER SPRING INSTALLATION KITS KIT INCLUDES: 4 X LEAF SPRING U-BOLTS WITH WASHERS AND NUTS 8 X LEAF SPRING BUSHINGS WITH SLEEVES (GENERATION SPECIFIC) 2 X SPRING TO FRAME...

    We have assembled this kit with the best, most durable parts on the market to cure the common problem of damaged, dry rotted tie rod boots. This kit...

Prevent your knuckles from bending! Full bolt on minor grinding required to the knuckle cast seam and 2 holes drilled !  These will ship black powder coated for other color...

Call for information !

This kit  contains a new slip joint delrin that goes at the top of your arm near the trans

Take your Raptor or FRaptor to the next level with this Stock Replacement Fabricated LCA This kit is designed to directly replace your weak, worn out OEM arms. Its designed...

Type a description for this product here...

This Bypass Rack was made for a customers special request to have a through bed shock setup, but not lose use of his bed.  Bolts in to the bed using...