THIS KIT WAS ASSEMBLED WITH SOME OF THE STRONGEST HARDWARE ON THE MARKET. FITS GEN 1 AND GEN 2 FORD RAPTOR OEM AND SOME AFTERMARKET LOWER CONTROL ARMS THE REPLACEMENT...
This conversion kit was created from necessity. With the abundant availability of Gen 2 take off coilovers it was only natural for this kit to be developed. Hand Crafted in...
Not long after we released the conversion buckets we realized there was a need to properly run GEN 2 Raptor rear shocks on the Gen 12 F150s, This kit will require...
Ford Raptor Leaf Spring U-Bolt kit Compatibility may vary, but should work with OEM, Deaver and Icon leaf springs, may work with other springs, please measure to confirm before...
Replace those old worn out LCA bolt with our high strength Replacement kit The standard OEM replacement kit includes: 4 x M18-2.5 x 140mm class 10.9 bolts 4...
We finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The...
OUR NEWLY RELEASED KHC OFF-ROAD FABRICATED SHACKLES ARE OVER DESIGNED TO BE TOUGH AND WILL TAKE WHATEVER YOU CAN PUT THEM THROUGH. THE SHACKLE BODY IS BUILT FROM 3/16...
Fitment: 2011-2014 & 2017-current Raptor, 2015-current F150 with 9.75 rear differential (will not fit super 8.8) (sorry 2010 guys, your axle housing is different) Help all your unleashed power...
If Your replacing your shackles or springs, the OEM Bolts are one time use, Hardware is either Grade 8 or Metric 10.9 equivalent (zinc finish may vary between standard and...
This custom in house designed bump-stop brace kit is made from 1/4 inch steel and is designed to brace the rear frame of your F150 Raptor in order to prevent...
AUTHENTIC DEAVER SPRING INSTALLATION KITS KIT INCLUDES: 4 X LEAF SPRING U-BOLTS WITH WASHERS AND NUTS 8 X LEAF SPRING BUSHINGS WITH SLEEVES (GENERATION SPECIFIC) 2 X SPRING TO FRAME...
We have assembled this kit with the best, most durable parts on the market to cure the common problem of damaged, dry rotted tie rod boots. This kit...
Take your Raptor or FRaptor to the next level with this Stock Replacement Fabricated LCA This kit is designed to directly replace your weak, worn out OEM arms. Its designed...